|
|
 |
|
| Parking Control |
|
|
| Access Control |
|
|
| Safety Product |
|
|
| Remote Control |
|
|
| Clothing/Accessories |
|
|
| Flowers/Gifts |
|
|
|
|
|
|
 |
|
 |
|
|
|
 |
|
|
 Gallery |
|
| Free board |
|
| Catalog |
|
| QnA |
|
|
|
|
|
|
|
| |
|
|
 |
|
| 
Barrier Gates of Winner Technology have been
installed in parking lots of various purposes and
in the entrances and exits for vehicles passage
and acknowledged an excellent technical power.
It is composed of a reliable AC motor, drive
mechanism and control system.
GT-2031-5 can be opened and closed in a very
short time(about 1.5 sec.) without shaking the
edge of the arm. Opening and closing of the
gate are managed by vertical safety device
and in case of power failure, the gate can be
opened and closed easily by manual operation
using a lever in reserve. GT-2031-5 has a perfect and reliable all-in-one
drive mechanism and the mechanism can be
separated easily from the housing by removing
the bolt for drive mechanism separation. | |  | |  The spring mechanism built-in GT-2031-5 keeps the exact
level power of barrier gate arm. Also, the length of the spring
can be set up according to the one of the arm at its factory
before delivery of the product. the spring can be set up easily
again according to the combination of system,it can be set
up again. GT-2031-5 has a pivot which determines the running
direction of arm and it can be set up again. GT-2031-5 has
a pivot which determines the running direction of arm and it
can be easily replaceable from the right to the left so that
you can select the direction of the barrier gate freely depending on the
circumstances of the site.
|  GT-2031-5 can ensure safety of the cars and barrier gates
in case direct data transmission or power supply to the barrier
gate stops due to power failure or any other server down, etc.
For instance, if the barrier gate gets an impact by minor
collision with car, the P-bolt, which is connecter of a
mechanism and a bar, is cut so that the bar may elastically
turn on a level with the central axis, therefore, this system
can prevent structural transformation of the Barrier Gate
and can ensure safety of the cars.(Optional Function)
|
| |  | |
Operation Method | | Automatic - Automatic operation by the signal of loop
| detector | | | Manual - It can be opined/closed by the internal/external
| switch | | | In case of power failure - It can be opened
| /closed by manual method | Driving Method | | Motor, Deceleration Machine, Crank Pivot | Weight | | About 60kgs (including barrier arm) | Control Device | | Motor, Deceleration Machine, Crank Pivot | | | This control device is adopted only for them. | | | It has communication function and relay output built-in | | | It has digital input built-in.(sensor, loop detector,
| open/close possible | Operation Speed | | About 1.5 seconds | A R M | | Aluminum flat arm(rubber pad is attached
| at the lower part of the arm) | Safety Device | | It detects vehicles associating loop coil with loop
| detector.(standard) | Input Voltage | | AC 220V ± 10%, 50/60Hz
| AC 110V ± 10%, 50/60Hz(Optional) | Consumption Power | | Maximum 150Watt | Operation Temp. | | -30℃ ~ 50℃, 10% ~ 90%(without congelation) | Protection | | Outdoor standalone waterproof type | Material of Case | | Steel 2.0mm (optionally stainless steel 1.6mm) | Coating Method | | For outdoor use power coating |
|
|
|
|
|
